Skip to content

Group shots into scenes

Verification record: Umoupen 0.9.56 build 570 (2026-09-07) · Verification scope

In this article, scene / sequence means the upper-level group containing several shots. The names describe the application’s grouping and labels rather than a general production breakdown by location or action.

Group selected shots in the Storyboard Timeline into a single unit. Terminology sets the names used for that unit, and Numbering sets how shot numbers are counted.

Location: Storyboard Panel (Storyboard) → Settings → Terminology / Numbering

Terminology is in the Storyboard panel settings (gear icon). It switches the names used for the hierarchy levels.

OptionUpper levelMiddle level
Scene / CutSceneCut
Sequence / SceneSequenceScene

The hierarchy has three levels: the group, the unit shown in the Storyboard Timeline, and the panel. The lowest level is a panel under either option.

For adding, splitting, renaming, deleting, showing, hiding, locking the length, and playing units at the middle level, see Add, delete, and split shots and Shot length and playback range. These operations have not been checked on screen after switching Terminology.

The Japanese guide calls the middle level katto to match the application’s built-in Japanese display.

Select several shots in the Storyboard Timeline and right-click; the menu opens with these two commands. They do not appear when a single shot is right-clicked.

ControlPurpose
Group Shots into SequenceCombine the selected shots into one group
Ungroup SceneBreak the group apart into individual shots

The grouping command uses “Sequence,” while the resulting bar reads Scene 1 and the ungrouping command reads Ungroup Scene. The numbering description also calls this group a scene.

The built-in translations also register a separate command whose Japanese reads shiin ni matomeru, but this screen does not use it. Its English key is listed in the source article’s built-in translation table. Whether the labels change when Terminology is switched remains unverified.

A group is drawn as a bar above the row of shots, with a menu button at its right edge.

Grouping, ungrouping, and renaming are the only commands that act on the group itself. Length locking, playback, and the rest act on the shots inside it.

  1. Select several shots to group in the Storyboard Timeline.
  2. Right-click and choose Group Shots into Sequence. Use Ungroup Scene to break the group apart.

When it works: A bar labeled Scene 1 appears above the selected shots, and those shots are treated as one group.

Numbering sits directly below Terminology and selects the unit used to count shot numbers.

OptionCounting
EpisodeNumber shots continuously across the whole production
SceneRestart numbering within each scene

The same settings group also contains the following.

ControlPurpose
Lock shot numbersKeep numbers when shots are reordered
Renumber shots in current orderAssign numbers based on the current order

The built-in description says renumbering updates existing shot numbers in the selected range, and Undo restores the previous numbers. Per-scene numbering uses S1-C001, S2-C001, and so on, restarts numbers for each scene, and can also be undone. Shots outside a scene use S0.

When something is missing or does not work

Section titled “When something is missing or does not work”
  • No grouping command in the right-click menu: It does not appear when a single shot is right-clicked. Select several shots first, then right-click.
  • There is no Group into Scene entry: This screen labels the command Group Shots into Sequence. Only the create command uses the other name.
  • Numbers change: Use Lock shot numbers. Undo restores the previous numbers after renumbering.
  • The S part of a shot number does not match where the shot actually is: The S part is stored with the number and does not follow the shot in and out of a group. A shot just added to a group keeps S0, and a shot moved out of Scene 6 retains S6. Use Renumber shots in current order to update the numbers. The result after running it remains unverified.
  • Moving a shot out removed the whole scene: A group made of two shots is dissolved when one of them leaves, because a single shot is left. A group needs at least two shots.
  • Scene numbers do not match the order: Creating a scene between existing ones leaves numbers such as Scene 2 followed by Scene 1. Numbers follow the order of creation and are not reassigned by position.
  • Hands-on verification on build 568 confirmed that Terminology and Numbering are in the Storyboard panel settings (gear icon), the contents of both option lists, and that Lock shot numbers and Renumber shots in current order sit in the same settings group.
  • Hands-on verification confirmed that a single shot’s right-click menu carries no grouping command, and that selecting several shots and right-clicking opens the menu with Group Shots into Sequence and Ungroup Scene at the top. The resulting group is drawn as a bar labeled Scene 1.
  • That the S part does not follow a shot in and out of a group, that a group of two shots is dissolved when one leaves, and that a scene created between existing ones keeps a number out of order, come from hands-on checking by the user. What happens after running the renumber command remains unverified.
  • The Terminology options were confirmed on build 570. Build 568 presented the same setting as three production presets, Live Action, Animation, and Japanese. All of those names and all three hierarchy notations are still registered in the built-in translations, and no strings were added or removed, so only the presentation changed.
  • That the unit-level commands are shared across the names was read from the absence of add, split, and delete commands for the group level. It was not confirmed by switching Terminology on screen.
  • Verified on a user's device: Hands-on checking on the user's screen confirmed that Terminology now offers two options, Scene / Cut and Sequence / Scene, where build 568 presented the same setting as three production presets. Selecting several shots and right-clicking opens the menu with Group Shots into Sequence and Ungroup Scene at the top, and running it draws a bar labeled Scene 1 above the row of shots, with a menu button at its right edge. Only the create command is labeled sequence. Shot numbers keep the S0 prefix right after a group is created, and a scene created between existing ones keeps a number that follows the order of creation. Lock shot numbers was on during this check, so Renumber shots in current order was unavailable. Moving a shot out of Scene 6 leaves it outside that scene while its number still reads S6, so the S part is stored with the number rather than following the grouping. A group made of two shots is dissolved when one of them leaves, so a group needs at least two shots.
  • Verified from the current implementation: Between build 568 and 570 the built-in translations gained three entries, Export Book as PDF, Export every page as a PNG image, and Linear Segment, with none removed and no Japanese display changed, while the implementation changed in 2,097 places. Live Action, Animation, and Japanese and all three hierarchy notations are still registered in 570, so the shorter Terminology list is a presentation change rather than a string change. The diff tool listed 28 impacted articles, and STB-014 and STB-015 were not among them, so the change was only visible on screen.
  • Unverified: How grouping, ungrouping, and the Timeline change when Terminology is switched. What the menu button at the right edge of the group bar contains. What the S prefix and the scene numbers become after turning Lock shot numbers off and running Renumber shots in current order.
  • Evidence records: F-20260907-007