Camera Layer
Verification record: Umoupen 0.9.59 build 616 (2026-09-30) · Verification scope
A Camera Layer stores the animation’s framing and can change it over time. Framing determines which area of the artwork is seen through the camera. A camera key records its state at a particular frame, letting position, scale, and rotation change between keys.
Location: Bottom of the Layers panel → Camera
Set the framing with one Camera
Section titled “Set the framing with one Camera”- Create a New Camera Layer in layers.
- Pan, zoom, and rotate the Stage to create the framing you want.
- Select the Camera Layer and run Set Camera from View.
- Run Snap View to Camera and confirm that the Stage view matches the camera framing.
- Use Play From Camera to play through the camera view.
Animate the Camera
Section titled “Animate the Camera”- Select the Camera Layer and add a camera key at the starting frame.
- Move to a later frame and add another camera key.
- At the later key, change position, zoom, or rotation.
- Use Play From Camera and confirm that the playback range contains both keys.
To show and refine the movement path, continue to Camera lock, paths, and motion paths.
If the Camera view and export do not match
Section titled “If the Camera view and export do not match”| What to check | How to check it |
|---|---|
| Camera in use | First show only one camera and select its Camera Layer. |
| Stage view | Use Snap View to Camera to return to the camera framing. |
| Playback command | Check the result with Play From Camera, not normal playback. |
| Export range | Check the camera or target area in Choose what to export. |
| Export options | Check size and background in Configure export settings. |
Camera switching rules for multiple cameras have only limited verification. When isolating a framing mismatch, reproduce it with one camera.
Main options
Section titled “Main options”| Option | What it does |
|---|---|
| Set Camera from View | Applies the current view to the camera |
| Snap View to Camera | Matches the Stage view to the camera |
| Camera Transform | Sets position, zoom, rotation, and other properties |
| Play From Camera | Plays from the camera view |
Add camera shake
Section titled “Add camera shake”See Camera shake for opening the settings, enabling shake, setting its amount, and checking camera playback.
Convert a symbol to a camera
Section titled “Convert a symbol to a camera”The searchable command Convert Selected Symbol to Camera converts the selected symbol. Play from the camera afterward to check the framing.
Related articles
Section titled “Related articles”Verification
Section titled “Verification”- Verified on a user's device: On 2026-09-30 in build 616, confirmed for both a Camera Folder and a regular camera that with the Move tool, selecting the camera's row in the timeline did not show Shake settings in Options, while clicking the camera frame on the Stage did. Shake settings listed Enabled, Amount, Shake X/Y, Speed, Roll, and Roll Speed, and the Stage showed an orange frame for the shake range.
- Verified from the current implementation: The Move tool options build the camera section and Shake settings only when a selected symbol in the selected frame and a camera-type layer are both present. The built-in description says a Camera Folder camera frames only the layers inside it; in an empty Camera Folder, entering shake values did not move the drawing (values and structure checked in the saved file).
- Unverified: Only this addition was reviewed. Whether the shake appears on screen in a Camera Folder with child layers, export results, and Windows behavior have not been verified.
- Evidence records: F-20260930-007, F-20260924-003