Camera lock, paths, and motion paths
Verification record: Umoupen 0.9.57 build 596 (2026-09-20) · Verification scope
A motion path is the line connecting camera keys along their movement route. Create keys on a Camera Layer, and use Camera Lock to prevent accidental movement. To edit the motion path, unlock the camera and adjust the waypoints and curves between keys.
Location: Camera on the Stage / Layers panel
Protect the Camera from accidental changes
Section titled “Protect the Camera from accidental changes”- Select the target camera.
- Enable Camera Lock.
- Select another layer and edit artwork on the Stage.
- Select the camera again and confirm that its position and framing did not change.
Disable Camera Lock before editing the path.
Show and edit the movement path
Section titled “Show and edit the movement path”- Select a Camera Layer that has at least two camera keys.
- Check that the movement path connecting the camera keys is shown on the Stage.
- Select a key or waypoint shown on the Stage.
- Move the waypoint or curve gradually.
- Use Play From Camera and confirm that the playback range contains the edited interval.
If the path does not appear
Section titled “If the path does not appear”| Symptom | Check this first |
|---|---|
| No path appears | Select the Camera Layer and confirm that it has camera keys on at least two different frames. |
| You cannot move a waypoint | Disable Camera Lock, then select the camera or path again. |
| You cannot tell which camera owns a line | Temporarily hide the other cameras and inspect one camera at a time. |
| The edited interval is not played | Set the playback range to include both keys and use Play From Camera. |
Main options
Section titled “Main options”| Option | What it does |
|---|---|
| Camera Lock | Prevents accidental camera movement |
| Movement path | The line shown on the Stage connecting the camera keys |
| Waypoint | A point that adjusts an intermediate position and the curve of the path |
| Play From Camera | Plays the camera result |
Related articles
Section titled “Related articles”Verification
Section titled “Verification”- Verified from the current implementation: Verified in the current implementation that
Motion Pathis the undo name used when the path is moved with the move tool, and that the built-in translations have no display item namedMotion Path,Camera Path, orWaypoint. - Unverified: Not verified: whether there is a control that toggles the movement path display; the other items and results in this article on build 596, how they look in the live interface, and the Windows version.
- Evidence records: F-20260920-003