Change exposure length and position
Verification record: Umoupen 0.9.59 build 628 (2026-10-05) · Verification scope
An exposure is the interval or duration for which one drawing is shown. Extending it holds the same drawing longer; moving its start changes when it appears. Both operations adjust timing without changing the drawing.

Location: Timeline (Panels → Show Panels → Timeline)
Shortcut (macOS): 4 (Extend Frame) / ⇧3 / ⇧4 (Move Frame left / right)
Shortcut (Windows): 4 (Extend Frame) / Shift+3 / Shift+4 (Move Frame left / right)
Basic steps
Section titled “Basic steps”- Select the drawing in the Timeline.
- Adjust its timing with one of these commands.
| Command | Result |
|---|---|
| Shorten Frame | Shortens the exposure by one frame. |
| Extend Frame | Extends the exposure by one frame. |
| Move Frame Left | Moves the drawing’s starting position to the left. |
| Move Frame Right | Moves the drawing’s starting position to the right. |
The display duration or start time of the same drawing changes. The contents of the drawing stay the same.
Extend a drawing in the middle by three frames
Section titled “Extend a drawing in the middle by three frames”Select the leaning pose at frame 29 on A. Choose Frame → Lengthen Frame three times. Its exposure extends from three frames to six, moving the next drawing’s start from frame 32 to frame 35.
A is the lower row in the images.
Before

After extending by three frames

Compare playback
Section titled “Compare playback”Both clips show five passes of the same short movement, starting at frame 26, at the same zoom and playback speed. The leaning pose holds for six frames instead of three, delaying the following drawings by three frames. To end on the same pose, the before clip plays through frame 35 and the after clip through frame 38.
Before: hold the middle drawing for three frames
After: hold the middle drawing for six frames
Related articles
Section titled “Related articles”Verification
Section titled “Verification”- Hands-on verified: Checked the displayed interface in installed build 628 and published a faithful crop. The B and A rows show where each drawing starts and how long it is held before the next drawing.
- Unverified: Verification is limited to the captured interface and the actions described above. All article procedures, setting effects, output files, saving/reopening and Windows behavior were not reverified.